Get a useful view of your HVAC system.
The simplified MCerberus® installation path is designed so homeowners can install the monitoring system using plug-in power, without connecting to thermostat wiring.
Designed for an easier setup.
The simplified path supports approximately 95% of monitoring capability. It uses plug-in power and avoids connecting to thermostat wiring.
Because this setup does not include every possible signal, it may not provide an immediate alert for a catastrophic equipment shutdown. Review the installation guide to understand what is included with your configuration.
Open the hardware installation guide ↗Know the limits of each setup
Full installation features that require electrical connections or access inside HVAC equipment should be installed by a qualified or experienced person. Always follow product instructions and local requirements.
Select the model
Choose MCB-410A or MCB-414A based on the features you need.
Review the guide
Read the hardware installation guide before beginning.
Connect to monitoring
Use a WiFi network with internet access and visit the monitoring portal.
Simplified homeowner installation
Use a plug-in 120VAC-to-24VAC transformer, inlet and outlet temperature sensors, a drain-pan water sensor, and Delta P sensing for equipment ON/OFF detection. This installation does not require thermostat signal connections. The schematic shows the simplified configuration; available functions depend on the installed sensors.
Select the diagram to view it at full size. Follow the hardware installation guide for detailed instructions.
Hardware installation guide ↗